Guangdong Sanhe Pile Co.,Ltd.



Submit

Cancel

PRODUCTS

Traveling The World Harmoniously,Bearing The Future

PRODUCTS

Traveling The World Harmoniously,Bearing The Future

KBORON® 金润纳® SK6106 无味齿轮油复合剂

Feedback





描述

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

KBORON® 金润纳® SK6106 无味齿轮油复合剂

产品描述

KBORON® 金润纳® SK6106是新一代节能环保通用齿轮油复合剂。由抗水解的纳米钙多效添加剂、硫磷系极压抗磨剂、纳米陶瓷减摩剂、酚胺抗氧剂、金属减活剂等制成。与传统的硫磷（S/P）型剂对比，腐蚀性小,抗磨性好，平衡油温低，摩擦阻力小，换油里程长，节能又环保。由于油膜厚又有弹性，不但抗高速冲击负荷，且适应高扭矩工况。硼酸盐的加入使防锈性能更好,齿面点蚀和密封寿命大大延长，且毒性小，无臭味。

产品特点

■ 负荷能力强，抗磨性能好，摩擦阻力小

■ 平衡油温，换油周期长

■ 油膜厚由弹性，能抗高速冲击负荷，适应高扭矩工况

■ 防腐蚀性，齿面点蚀和密封寿命延长

■ 节能环保，毒性小，无臭味

产品参数

■ 密度 kg/m3/20℃ 1200 ~1300

■ 运动粘度mm2/s/100℃ 5.5 ~ 7.5

■ 开口闪点℃ ≥ 135

■ 倾点℃ ≤ -20

■ 钙含量% 0.4 ~ 0.5

■ 硫含量% 3 ~ 4

■ 磷含量% 2 ~ 3.5

■ 四球机试验PB/N ≥ 1200

■ 四球机试验PD/N ≥ 2450

■ 磨斑直径D/mm(450N 30min) ≤ 0.4

■ 铜片腐蚀（121℃，3h） ≤1b

注：

4.2%SK6106+95.8%基础油（30%150BS+70%500N）

产品应用

■ 适用于API-Ⅰ、Ⅱ类基础油，

■调制各种负荷、粘度级别的车辆齿轮油，开式、闭式工业齿轮油和蜗轮蜗杆油。

建议加量

■ GL-3：1.1%,■ GL-4：2.1%,

■ GL-5：4.2%,■ CKC：1.0%,

■ CKD：1.5%,■ CKE：2.0%。

注意事项

■ 应在干燥、通风、45℃以下条件下储存

■ 本品不易燃、不易爆、无腐蚀

■ 调合温度不应超过75℃

■ 避免接触皮肤，一旦接触，用皂水冲洗干净。

扫二维码用手机看

Last

无

Feedback

Best Service For You !

Username used for comment:

客户留言

Description:

* Messages：

Tel：

Fax：

E-mail：

* Verification code:

Address：

Related Products

Prestressed concrete hollow supporting pile (PCS supporting pile)

The utility model relates to a kind of dodecagonal hollow tubular retaining pile with symmetrical cross-section shape, honeycomb hexagon structure characteristics, and mortise tenon joint parts on both sides.

Prestressed square pile

Full prestressed and partially prestressed solid high strength concrete square piles have higher crack resistance and wider application range. Factory prefabrication, reliable product quality, solid end increased section modulus, for the petrochemical engineering with high bending resistance and high bearing capacity requirements, has a higher advantage. At the same time, the position of reinforcement can be adjusted, the thickness of protective layer can be increased, and the corrosion resistance of precast pile can be improved when it is used in coastal areas.

Prestressed concrete tubular body for foundation treatment

Prestressed high strength concrete uplift pile (pahc pile)

The prestressed high-strength concrete uplift pipe pile formed by Pretensioning centrifugal process is suitable for the low cap pile foundation of industrial and civil buildings, and the foundation design of structure engineering can also be used for reference.

Pretensioned prestressed high strength concrete pipe pile (PRC)

Pretensioned prestressed high-strength concrete pipe pile with mixed reinforcement is centrifugal shaped pipe pile with main reinforcement composed of prestressed spiral channel bar and hot-rolled ribbed steel bar, which is suitable for the occasions with high requirements for foundation seismic resistance and horizontal resistance. The products are divided into 400mm, 500mm, 600mm, 800mm and other specifications according to the outer diameter; they are divided into AB type, B type, C type and D type according to the effective preloading stress value of concrete.

Pretensioned prestressed high strength concrete pipe pile (PHC pile) pretensioned prestressed high strength concrete corrosion resistant pipe pile (dphc pile)

PHC pipe pile will encounter the erosion of harmful ions in corrosive geology, such as chloride ion, sulfate ion, carbonate ion, freeze-thaw damage and so on. In view of chloride penetration, sulfate erosion and freeze-thaw three kinds of environmental conditions, the company's technical personnel have been working since 2004 According to different corrosion conditions and the contribution of different admixtures to different environment, the durability index of pipe pile concrete is determined, and dphc pipe pile series products are formed. In 2006, dphc pipe pile series products passed the achievement appraisal organized by China Building Materials Federation and formed enterprise standards.

Prestressed high strength concrete pipe pile (PHC pile) by pretension method

Pretensioned prestressed high strength concrete pipe pile (PHC pile) is the most commonly used cement product in building infrastructure at present. It has the characteristics of high strength (above 80MPa), high density, low water cement ratio, low permeability (impermeability grade > P12), impact resistance and high structural bearing capacity. It is widely used in industrial and civil buildings, roads and railways, bridges, ports and wharves and other engineering structures.

Centrifugal prestressed concrete precast enclosure

Prestressed centrifugal assembled wall products are prefabricated wall products made by Pretensioning, centrifugal and steam curing process.

Pretensioned prestressed diamond pile

Pretensioned prestressed diamond pile is a super high strength pipe pile with concrete compressive strength grade of C90 and above. It has more mechanical properties than the ordinary pipe pile products. At the same time, because of its high strength and high density, the product has ultra-high corrosion resistance. It can be used in petrochemical engineering with high bearing capacity and high bending resistance requirements, and can also be used in high pile cap engineering. According to the concrete compressive strength grade of C90, C100, c105 and C110, the products of pretensioned prestressed diamond pile are divided into specifications of 300 mm, 400 mm, 500 mm, 600 mm, 700 mm and 800 mm according to the outer diameter. According to the effective preloading stress of concrete, it can be divided into a type, AB type, B type and C type.





GUANGDONG SANHE PILE CO.. LTD.

Traveling The World Harmoniously,Bearing The Future

Tel：

0760-28189998

Add：

Add: No. 30, Tongxing East Road, Dongsheng Town,Zhongshan City, Guangdong Province

ICP

Time of issue:2019-08-12 00:00:00