Guangdong Sanhe Pile Co.,Ltd.



Submit

Cancel

PRODUCTS

Traveling The World Harmoniously,Bearing The Future

PRODUCTS

Traveling The World Harmoniously,Bearing The Future

KBORON® 金润纳® KRN8060 水性硅烷低聚物

Feedback





描述

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

KBORON® 金润纳® KRN8060

水性硅烷低聚物

【免水解 | 直接添加】

产品描述

KBORON® 金润纳® KRN8060是一种免水解可直接添加的水性有机硅化合物（环氧基官能化的低聚硅氧烷），具有环氧基官能团，经新型工艺聚合而成。

KBORON® 金润纳® KRN8060应用优势明显：直接添加，使用简便；稳定性好；低VOC含量。

产品特点

■ 不需要活化水解，可任意阶段直接添加

■ 解决了传统硅烷易水解只能前添加的难题

■ 稳定性好，在水性体系可长达12个月的稳定性

■ 酸碱体系通用，PH值适用范围广

■ 有效增强涂料对玻璃、金属等无机底材的附着力

■ 可改善粘合剂和密封剂的粘合性能

■ 可提高强度、耐水性、耐化性、电气及耐温等性能

■ 成膜透明

产品参数

■ 产品描述：环氧基官能化的低聚硅氧烷

■ 产品外观：无色透明液体

■ 有效含量： 50±2%

■ P H 值： 5~7

产品应用

■ 水性涂料

■ 水性树脂改性

■ 金属表面处理液

■ 胶粘剂

■ 玻璃底涂

■ 玻璃纤维增强

■ 无机矿物的表面处理

■ 有机材料的表面改性

建议加量

■ KBORON® 金润纳® KRN8060应用建议加量：占原液的0.5 ~5%；

■ 自干或低温干燥条件下：占体系的 0.5 ~ 3%；

■ 高温130摄氏度及以上：占体系的 0.5 ~ 5% 。

注意事项

■ 应在干燥、通风、45℃以下条件下储存；

■ 避免接触皮肤，一旦接触，用皂水冲洗干净。

扫二维码用手机看

Last

无

Feedback

Best Service For You !

Username used for comment:

客户留言

Description:

* Messages：

Tel：

Fax：

E-mail：

* Verification code:

Address：

Related Products

Prestressed concrete hollow supporting pile (PCS supporting pile)

The utility model relates to a kind of dodecagonal hollow tubular retaining pile with symmetrical cross-section shape, honeycomb hexagon structure characteristics, and mortise tenon joint parts on both sides.

Prestressed square pile

Full prestressed and partially prestressed solid high strength concrete square piles have higher crack resistance and wider application range. Factory prefabrication, reliable product quality, solid end increased section modulus, for the petrochemical engineering with high bending resistance and high bearing capacity requirements, has a higher advantage. At the same time, the position of reinforcement can be adjusted, the thickness of protective layer can be increased, and the corrosion resistance of precast pile can be improved when it is used in coastal areas.

Prestressed concrete tubular body for foundation treatment

Prestressed high strength concrete uplift pile (pahc pile)

The prestressed high-strength concrete uplift pipe pile formed by Pretensioning centrifugal process is suitable for the low cap pile foundation of industrial and civil buildings, and the foundation design of structure engineering can also be used for reference.

Pretensioned prestressed high strength concrete pipe pile (PRC)

Pretensioned prestressed high-strength concrete pipe pile with mixed reinforcement is centrifugal shaped pipe pile with main reinforcement composed of prestressed spiral channel bar and hot-rolled ribbed steel bar, which is suitable for the occasions with high requirements for foundation seismic resistance and horizontal resistance. The products are divided into 400mm, 500mm, 600mm, 800mm and other specifications according to the outer diameter; they are divided into AB type, B type, C type and D type according to the effective preloading stress value of concrete.

Pretensioned prestressed high strength concrete pipe pile (PHC pile) pretensioned prestressed high strength concrete corrosion resistant pipe pile (dphc pile)

PHC pipe pile will encounter the erosion of harmful ions in corrosive geology, such as chloride ion, sulfate ion, carbonate ion, freeze-thaw damage and so on. In view of chloride penetration, sulfate erosion and freeze-thaw three kinds of environmental conditions, the company's technical personnel have been working since 2004 According to different corrosion conditions and the contribution of different admixtures to different environment, the durability index of pipe pile concrete is determined, and dphc pipe pile series products are formed. In 2006, dphc pipe pile series products passed the achievement appraisal organized by China Building Materials Federation and formed enterprise standards.

Prestressed high strength concrete pipe pile (PHC pile) by pretension method

Pretensioned prestressed high strength concrete pipe pile (PHC pile) is the most commonly used cement product in building infrastructure at present. It has the characteristics of high strength (above 80MPa), high density, low water cement ratio, low permeability (impermeability grade > P12), impact resistance and high structural bearing capacity. It is widely used in industrial and civil buildings, roads and railways, bridges, ports and wharves and other engineering structures.

Centrifugal prestressed concrete precast enclosure

Prestressed centrifugal assembled wall products are prefabricated wall products made by Pretensioning, centrifugal and steam curing process.

Pretensioned prestressed diamond pile

Pretensioned prestressed diamond pile is a super high strength pipe pile with concrete compressive strength grade of C90 and above. It has more mechanical properties than the ordinary pipe pile products. At the same time, because of its high strength and high density, the product has ultra-high corrosion resistance. It can be used in petrochemical engineering with high bearing capacity and high bending resistance requirements, and can also be used in high pile cap engineering. According to the concrete compressive strength grade of C90, C100, c105 and C110, the products of pretensioned prestressed diamond pile are divided into specifications of 300 mm, 400 mm, 500 mm, 600 mm, 700 mm and 800 mm according to the outer diameter. According to the effective preloading stress of concrete, it can be divided into a type, AB type, B type and C type.





GUANGDONG SANHE PILE CO.. LTD.

Traveling The World Harmoniously,Bearing The Future

Tel：

0760-28189998

Add：

Add: No. 30, Tongxing East Road, Dongsheng Town,Zhongshan City, Guangdong Province

ICP

Time of issue:2019-08-12 00:00:00